
Our Slat FX Colorbond Range
Oxworks' Colorbond® Steel Fencing Slat FX range consists of our standard Colorbond boundary fencing combined with a stylish Slat FX top panel allowing for both privacy and air flow.
Oxworks' Colorbond® Steel Privacy Fencing is rolled In-House using only Genuine BlueScope Colorbond® Steel... Made in Australia, to Australian Standards to suit our conditions.

Coloursmart Infill Sheet Profile Options

Our unique Sawtooth/Zigzag Profile ensures your fence looks great from both sides.

We are now rolling the traditional Trimline Colorbond® Steel Fencing profile

For more Colorbond® Steel Fencing product information including DIY Guides, Videos, Downloads and Additional Information click here
Filter by Height
Showing all 12 results
Downloads

Brochure
Download Here

Specification Sheet
Download Here

Site Plan
Download Here

Colour Chart
Download Here
Product Information
Coloursmart In Fill Sheet Profile Options

Sawtooth Profile
Our unique Sawtooth/Zigzag Profile ensures your fence looks great from both sides.

Trimline Profile
We are now rolling the traditional Trimline Colorbond® Steel Fencing profile.
Our Univeral Channel Posts & Rails

Channel Posts

Rails
Australian Made for Australian Conditions
Oxworks manufacture using only BlueScope Colorbond Steel made in Australia. Unlike some fencing manufacturers, we do not use cheap imported painted steel unproven in the harsh Australian conditions. When comparing other fences, be sure to check you are receiving genuine Colorbond Steel.
Tested… then Tested again under the harsh Australian Sun
Our ColourSmart Colorbond Fences are designed to Australian Standards, with engineering and wind testing to Australian wind loading standards. Steel thicknesses for our Colorbond Fencing range are as follows:
Posts & Rails 0.8mm BMT (base metal thickness)
Infill Sheets 0.35mm BMT (base metal thickness)
The base metal is finished with Super Polyester pre-painted coating technology to ensure your fence looks fantastic for many years.
Meets Aus Standards AS1397 & AS2728 for coated mass & Paint film thickness
Modern, Designer and Contemporary Colours
Whether your block is level or sloping, you can still build a great looking fence as ColourSmart Colorbond Fence panels can be stepped or raked to follow the contours of the ground.
Unlike Timber Paling Fences, our popular ‘sawtooth’ profile infill sheet (pictured below) looks the same from both sides so both you and your neighbour will love the end result (nobody gets the bad side).
Colorbond® Fencing won’t rot, warp or twist, and doesn’t need painting, making it an affordable low maintenance fencing solution.
Maintenance & Warranty
ColourSmart Colorbond Fencing requires minimal ongoing maintenance to look great. We recommend you hose the fence every 6 months to remove environmental debris. Colorbond Steel is not affected by warping, rotting or termites, and is non-combustible which makes it ideal in bushfire zones.
Your ColourSmart Colorbond Fence is covered by extensive Warranties for your peace of mind. Not only do you receive the Oxworks 10 Year Warranty which extends to our entire range, you also receive the Colorbond Steel for Fencing Warranty provided by BlueScope.
DIY Guide
Site Plan & Ordering
- Decide on fence position and measurements of panels & posts by creating a mud map of your site.
- Following the above Materials Checklist, calculate how many of each component you require
- Contact any one of our stores to complete your order. Most items are available in stock
String Line & Post Holes
- Set Stringline along the desired line of the fence, close to the ground
- Measure out all holes, starting with the gate post holes
- Dig post holes along string line 600mm deep x 250mm in diameter
- Posts will sit approximately 500mm into the post holes
Install Posts
- Ensure post centres are accurate – see below diagram
- Screw posts back to back, place them in post holes and concrete them in, ensuring they are level and flush along the stringline
In Fill Sheets
- Insert the bottom rail into the post channels and screw through each side of the post channel to secure it along the bottom level of your fence line
- Place sheets into the channel posts and bottom rail ensuring they overlap evenly and lock in to place
- Place the top rail over the top of sheets and screw through each side of the channel post to secure
Install Gate(s)
- Gates assembly: See below diagram
- Attach hinge & latch components of the Gate Kit to Gate as per instructions
- Attach hinge & latch components of the Gate Kit to the 50 x 50 Steel Gate Posts as per instructions