Glass Handling Tips
Toughened glass is the safest of all types of glass. It’s designed to shatter into small pieces when it breaks which cuts down on the possibility of serious injury. This doesn’t mean toughened glass is completely safe, however, and it can still cut and injure quite seriously. You need to remain aware of the dangers of toughened glass and take adequate safety precautions.
Whenever you work with glass, you need to wear safety goggles. If you have an accident and the glass shatters, your eyes will be protected. It should be a priority to put them on before you do any work with glass. Wearing goggles is especially important with tempered glass because it shatters into small pieces and these can easily find their way to your eyes unless they’re covered.
Safety Gloves and Wrist Protectors
You should always wear safety gloves and wrist protectors when you work with toughened glass. Make sure that the gloves are strong enough to protect your hands in case of breakages. However, the gloves should also be thin enough so that you can work comfortably and the palms should not be too slippery so you can maintain a good grip on the glass.
Toughened glass has many uses and is ideal for applications where issues of safety arise. A perfect example of this is the use of toughened glass pool fencing and balustrading. When you’re moving a sheet of toughened glass, make sure you keep the corner protectors on.
While the glass is strong, the corners are the most vulnerable points and need to be protected as much as possible. If you don’t pay attention to using protectors, there’s a danger of catching the corner on a snagging point and it will cause the glass to shatter.
Standing the Glass
With toughened glass, you need to be very careful how you stand the glass. Don’t stand a sheet of toughened glass on cement, tile or metal. This is because the glass can topple over and if it does, the entire sheet of toughened glass will shatter.
You should always carry a piece of tempered glass in an upright position in order to keep the best grip on it. This gives you more control which means there’s less chance of dropping it and the glass breaking. Additionally, when you do set it down, it’s best to do so on some softly padded material which takes away the danger of the glass shattering as it makes contact with a solid surface.
When you’re installing toughened glass, it ideally needs to be at room temperature in order to be able to work with it and to avoid the possibility of it shattering. To do this, keep the glass in the house overnight in an area where it can warm up properly.